ESP32-2432S028R 2.8 TFT Module

ESP32-2432S028R 2.8 inch Resistive Touch Tft Lcd Module

240x320 Pixel Rgb Led Ldr Usb Uart IO Sensor Temperature Speaker Sd Card Smart Screen Home Automation Machine Control Iot

     This lcd board is controlled by the ESP32-WROOM-32 module. It is a dual core wifi bluetooth supported processor. Its speed can reach 240MHz and it has 520KB SRAM, 448KB ROM. The flash size is 4MB. It can be used for control, sensing, monitoring, logging etc. operations over Wifi. It also allows you to perform visual and audio tracking at the point where it is located. This module can be programmed with Arduino IDE, ESP IDE, Micropython, Scratch and Mixly software.

     It drives the 240x320 pixel 2.8 inch capacitive touch lcd. You can adjust the lcd backlight. It controls the other circuits on the board. There is a light detecting ldr sensor on the front surface. 1 Piece rgb led is on the back surface. Usb, uart, Io, I2c communication supports are available. Memory can be increased with an sd card. Various temperature sensors can be read. It can control various devices with the IO port. It can output audio with 2w power. 

Features:

• Integrated: ESP32-WROOM-32
• Operating voltage Usb Dc 5V
• Operating current: 200mA
• Lcd size: 2.8inch
• Screen resolution: 240x320 pixels
• Angle: Less than 60 degrees
• Resistive touch.
• Demo program is loaded
• Ldr sensor on the front face for light detection
• Usb ( ch340 ) communication support
• Rgb led on the back surface
• Uart communication support
• Micro Sd memory card socket
• 2W audio output 2 pin
• IO socket
• IIC Sensor connection sensor
• Boot button
• Reset button
• Esp Ide, Micropython, Arduino, Scratch and mixly programming support
• Operating temperature:  -20C  / 70C
• 4 Pieces mounting hole
• Dimensions: 50mm x 86mm
• Weight:  40gr

Usb driver: The CH341SER.EXE file should be downloaded via Google and installed.

wch-ic.com/products/CH340.html

Software support:    pan.jczn1688.com/1/ESP32%20module

Package Contents:

•     1 Piece ESP32-2432S028R 2.8 TFT Module
•     1 Piece USB cable
•     1 Piece Touchpen
•     1 Piece 4 pin cable

.