XH-W3001 AC 220V Digital Thermostat

XH-W3001 AC 220V Digital Thermostat

Incubator Pet Aquarium Heater Cooler Boiler Freezer Refrigerator Kettles Control Device -50C to 110C 0.1C 1500W

     The device operates with 220V electricity. For this reason you must be extremely careful while making the connections and during first operation. You can make the device connections as in the picture below. The cables on the left side are the supply cables of the device. You must connect them to a 220V socket.  The cable ends in the middle are the output ends for the 220V heater. There is also 220V on these ends. These cables must also not be touched with bare hands while the device is energized. On the far right there is the ntc temperature sensor probe.

     Since the use and settings of the device are simple, we will ship the device to you without testing it. You can easily make the settings of the device that reaches you by reading the descriptions under the picture below.

Device usage and making the settings:

     The device has 1 display. The ambient temperature is shown on this display. There are 2 buttons on the device. The settings of the device are made with these buttons.

     Basically 2 temperatures can be set on the device. These values are seen by pressing the right and left buttons. According to the magnitudes of these values bound to the left and right buttons, the device automatically switches to heater or cooler mode.

     If the temperature setting bound to the left button is greater, the device works in cooler mode. ( Left: 30 Right: 20 Cooler mode )

     If the temperature setting bound to the right button is greater, the device works in heater mode. ( Left: 20 Right: 30 Heater mode )

     You can see these temperature values with short button presses. If you press the buttons for a long time you can change the settings of the relevant value. After a long press the buttons start to function as up and down. After you set the relevant temperature by pressing the up and down buttons, when you wait for a while this value is saved. And the device will start to work according to this value.

     As an example, let us set the value bound to the left button to 37 and the value bound to the right button to 38 degrees. In this case the device will be at the ideal settings for an incubator.  When the ambient temperature drops below 37 degrees the heater becomes active. The environment will start to warm up. When the temperature rises above 38 degrees the device will turn off the heating. In this case the ambient temperature will move between 37-38 degrees.

     After making the relevant settings, turn the supply of the device off and on. See that the values you set are saved in the device. If you want to reset the device settings, press and hold the 2 buttons at the same time, after a while the device settings will be reset.

     If you see FFF or LLL values on the device screen, Or if there are big jumps in the temperature, for example if it jumps from 22 degrees  suddenly to 28 degrees, it means the temperature probe of the device is faulty. When this probe is replaced the relevant problem will disappear.

Features:

• Model: XH-W3001
• Input voltage: AC 110V / 220V
• Output current: 7A   ( It can be used at 10A for short periods )
• Output power: 1500 W
• Operating temperature range:  -50C  /  110C
• Temperature precision: +-0.1C
• Measurement precision: +-0.2C
• 3 Digit display
• 2 Piece temperature setting button
• Output active indicator led.
• Settings are saved to memory. After a power cut the system works according to the saved settings.
• Sensor type:  NTC 100K
• Probe length: 1 Meter
• 2 Piece mounting tab
• 220V connection cable length 10cm
• Dimensions: 31mm x 45mm x  60mm
• Weight: 50gr

 
Package Contents:

• 1 Piece XH-W3001 220V Digital Thermostat

.