Sepetim
Çerez kullanıyoruz 🍪
Sitemizin işlevselliğini ve tarama deneyiminizi geliştirmek için çerezler ve benzeri teknolojiler kullanıyoruz. Daha fazla bilgi için Gizlilik İlkesi sayfamızı inceleyebilirsiniz.
Saat 15:30'a kadar gelen siparişler aynı gün kargolanır
1100 TL üzeri Sürat Kargo ücretsiz
1500 TL üzeri Yurtiçi Kargo ücretsiz

RA-01SC-P Lora Transceiver

RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
Yeni
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
RA-01SC-P Lora Transceiver
472.32TL
Ex Tax: 393.60TL
  • Stok Durumu: Stok Var
  • Marka: Ai-Thinker
  • Model: Ra-01SC-P Modül
  • SKU: RBZ.101.758

 

Lora RA-01SC-P Rf Module

410MHz-525MHz LLCC68+ Transceiver Long Range 0.5km/10km Water Electricity Gas Meter Wireless Sensor Temperature Data Monitoring Remote Control Telemetry Automation Robot Pump Electrical Control

  

     RA-01SC-P LoRa (long range radio) communication module. The LLCC68+ IC is used. Thanks to the built-in PA (power amplifier) on it, it reaches a much higher output power (+29dBm) than standard modules. This high power allows rf signals to pass through obstacles more easily. Stable communication is observed at up to 6-7km with standard antennas, and up to 10-15km in open areas with high gain antennas.

     It is widely used in applications such as Iot sensor reading, various control and automation operations, and meter reading. It can also operate in the 410MHz-525MHz frequencies. An external antenna connection is made with the Ufl socket. In addition, it can be used with the antenna pin on the edge via the pcb or by soldering helical etc. antennas of suitable thickness.

     The RA-01SC-P module has a built-in PA (power amplifier) and LNA (low noise amplifier). The PA raises the output power of the chip from the standard +22dBm level to +29dBm. The LNA comes into play on the receiver side and brings the sensitivity to the -137dBm level. These two components together significantly increase the link budget and, with the same antenna in ambient conditions, provide stable communication over longer distances compared to modules without a PA. The PA can be disabled by controlling the CPS pin from the MCU, so the module can also be used in applications requiring short range or low power.

 

Features:

  • Ai-Thinker RA-01SC-P Lora Transceiver
  • IC: LLCC68+
  • Operating voltage: DC 3.3V (3.0V - 3.6V)  ( Current capacity should not be below 1A)
  • Operating current receiver: 11mA
  • Operating current transmitter: 700mA (With built-in PA)
  • Output power: +29dBm  700mA
  • Communication range: 0.5km - 15km ( Suitable antenna and communication environment affect performance)
  • Operating frequency: 410MHz - 525MHz
  • Communication interface: Spi
  • Maximum packet size: 256 byte
  • Programmable data rate: maximum 300kbps
  • LoRa bandwidth: 125kHz, 250kHz, 500kHz
  • FSK, GFSK, LoRa modulation support
  • Spreading factor: SF5-SF11
  • Sensitivity: -137dBm
  • Metal shielding case
  • External antenna connection support with Ufl socket
  • Operating temperature:  -40C  /  85C
  • Package: Smd (16 pin)
  • Pin pitch: 2mm
  • Dimensions:  16mm x 17mm x 3.2mm
  • Weight: 3gr

 


 

Pin description:

No Name Function
1 ANT Connect antenna
2 GND Ground
3 3V3 Typical value 3.3V power supply
4 RESET Reset pin
5 CPS

FEM chip TX pass-through enable pin; in transmit mode this pin is low level RF

and is directly output without PA amplification, and is internally pulled up by default

6 DIO1 Digital IO1 software configuration
7 DIO2 Digital IO2 software configuration
8 DIO3 Digital IO3 software configuration
9 GND Ground
10 BUSY Status indication pin
11 RF_EN

FEM chip enable pin; high level is effective, the module is pulled up

by default; high level is in working state, low level is in sleep state

12 SCK SPI clock input
13 MISO SPI data output
14 MOSI SPI data input
15 NSS SPI chip select input
16 GND Ground
EPAD GND Ground; reliable grounding is required to facilitate heat dissipation

 

Package contents:

  • 1 Piece RA-01SC-P Lora Transceiver

 

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Captcha
NTC 200cm Cabled 10K NTC 200cm Cabled 10K
10-15 Days
Marka: OEM
  200cm Cabled Waterproof 10K NTC Sensor Heat Temperature Probe Thermistor 1% 3950 Air Conditioner Thermostat Thermometer Refrigerator Hea..
69.12TL
Ex Tax:57.60TL
Marka: OEM
AS5600 Magnetic Angle Measurement Sensor Module 12 Bit Contactless Position Potentiometer RC Servo Pedal Mechanical Angle Rotary Control ..
132.48TL
Ex Tax:110.40TL
Add to Cart
Marka: OEM
  Mini 5cm 8 Ohm 5W Speaker Round Speaker 50mm 5 Watt Audio Music Amplifier Sound Generator High Quality Toy Product Presentation  ..
86.40TL
Ex Tax:72.00TL
Marka: OEM
  BMI160 Sensor Module Three Axis Gyroscope + Three Axis Accelerometer      The module is Bosch's new BMI160 ..
138.24TL
Ex Tax:115.20TL
Marka: OEM
  AC 20-500V 100A Square Digital Voltmeter Ammeter 220V Red Panel Mount Led Indicator Display Electric Voltage Current Monitoring Meter ..
299.52TL
Ex Tax:249.60TL
Add to Cart
Marka: OEM
  ADUM3160 USB Isolator Module Cased        It is an isolation module developed for the protection of the USB p..
720.00TL
Ex Tax:600.00TL
Add to Cart
Marka: OEM
  5 Pieces SMD U.FL RF Antenna Connector Ufl Socket Gsm Gps Wifi Smt Laptop WIFI Modem Ipex IPX Coaxial Cable Connection Bluetooth Computer..
23.04TL
Ex Tax:19.20TL
Add to Cart
Marka: OEM
  NRF52840 ARM Cortex-M4F Promicro Module Bluetooth 5 Thread Zigbee ANT 2.4 GHz Wireless Communication Transceiver 64 MHz 1 MB Fl..
403.20TL
Ex Tax:336.00TL