4 Channel IR Line Tracking Module
115.20TL
Ex Tax: 96.00TL
- Stok Durumu: Stok Var
- Marka: OEM
- Model: 4 lü Çizgi İzleyen Sensör Kartı
- SKU: RBZ.100.306
Tags:
4 Channel
, Line Tracking
, Sensor Module
, Sensor
, Line Tracking Sensor
, Line Following Robot
4 Channel Infrared IR Line Tracking Sensor Module
It is a 4 channel obstacle detection sensor module. It consists of 1 control board and 4 infrared IR transmitter receiver modules. The control board determines whether there is an obstacle or a line according to the information coming from the IR modules. The sensitivity detection distance for each channel is adjusted with the potentiometers on the control board. There is the option of fixing it to a suitable place with M3 screws.
The connection between the control board and the sensors is made with jumper cables. Thanks to the fixing screws on the sensors, the sensors can be used either vertically or horizontally as desired. There are OUT pins for the outputs taken from the 4 sensors on the control board, along with supply and ground pins. In addition, there is a LED on the control board for each output.
Features:
- Operating Voltage : DC 3.3V-5V
- Operating Current : >1A
- Operating Temperature : -10C - +50C
- M3 fixing holes
- Detection distance from 1mm to 60 CM
- Sensitivity is higher at distances smaller than 10cm.
- Dimensions : Control Board 42 x 38 x 12 mm - Small Board 25 x 12 x 12 mm
- Output Pins : 1234: signal outputs, 56; VCC and GND
- The output signal is at TTL level. It can be used with a microcontroller or arduino boards. When an obstacle is detected, the output becomes 0. And the led connected to it lights up. If there is no obstacle, the output is at high level.
Package Contents :
- 1 Piece Control Board
- 4 Pieces IR Sensor Board
- 12 Pin Female Female Breadboard Cable