XY-L10A Battery Charge Control Board

XY-L10A 10A Battery Charge Control Protection Module

12V 24V Battery Lead Acid Gel Battery Lithium Li-lon Battery Digital Led Display

This product does not step down voltage. Connecting a charging adapter suitable for your battery is the responsibility of the user.

     With its current cut-off feature, it is a functional product with which you can safely charge your batteries and accumulators. The product operates with DC voltage in the DC 6-60V range. It is not used directly with 220V.

     If you long press the left button, you set the start voltage. If you long press the right button, you set the end voltage. There is no extra key for voltage adjustment. It automatically adjusts the output according to the voltage you supply at the input. It works by automatically detecting according to the voltage you supply for 12V and 24V batteries.

     The product has the feature of starting and ending the charging process by taking into account the voltage difference that occurs in full and empty batteries. For example, when a 12V battery reaches full charge, it can produce a voltage of up to 13.8V. When empty, this voltage value can drop to 11V.

Features:

• XY-L10A battery charge control board
• Operating voltage: DC 6-60V
• Operating current:  10A ( Using with 6A for a long time may damage the relay. )
• Blue bright display.
• Voltage control accuracy: 0.1V
• Output voltage: Direct output
• Tolerance: +/-0.1V
• Application areas:  Dc  6V / 60V battery
• 3 control buttons
• Uart communication socket
• Operating temperature:  -20C  /  65C
• Color:  Blue
• 4 Mounting holes
• 4-way connection terminal
• Dimensions: 42mm x 79mm
• Weight:  30gr

     Batteries must be charged with a current at the level of 1/10 or 2/10 of their capacity. It is appropriate to connect a current controlled power supply or charger to the product. You should not charge with a power supply that can deliver very high current. You may cause the relay on the device to break down.

Instructions for use:  For example, while charging a 12V battery, a power supply connection in the range of 12V to 14.8V is made from the input. The charge start voltage (dn) is set to 11V, and the end voltage (up)  is set to 13.8V. In this case, the charging process will continue while your battery voltage is in the range of 11V to 13.8V. For a higher charge level you can also set the end voltage to 14.4V, only in this case you need to check the temperature of the battery and the circuit. Your battery may be damaged by high temperature.

    Button description:
        SET key: When long pressed, the parameter setting mode is entered. Short pressing switches between parameters.
        UP and DOWN keys: Used to increase or decrease the value of the selected parameter. Down turns the charging on and off. The Up key shows the time and percentage charge status.

    Parameters:
        dn (Lower Voltage Limit): When the battery voltage drops below this value, the charging process starts.
        UP (Upper Voltage Limit): When the battery voltage rises above this value, the charging process stops.
        OP (Charging Time): Enables the charging process to be carried out for a certain period of time.

    Connection and operation:

•  Connect the module to the battery you want to charge and to a suitable dc power supply.
•  Enter the setting mode by long pressing the SET key and determine the appropriate dn and UP values with the UP/DOWN keys.
•  You can set the charging time with the OP parameter; by default this feature is disabled.
•  After making the settings, save by short pressing the SET key.
•  When the battery voltage drops below the dn value, the charging process will start automatically and will stop when it reaches the UP value.
•  If you encounter a locked program, while on 12V supply, switch the supply to 24V and turn the voltage input off and on while holding down the Set key. It will return to the screen showing nbe.

Points to be considered:

•     The module is not used directly with 220V AC; a suitable DC power supply is required.
•     Regularly check the temperature of the battery and the module during the charging process.
•     Avoid using a power supply that can deliver very high current; this may cause damage to the relay on the module.

Package contents:

•   1 Piece XY-L10A Battery Charge Control Board

     There is a video about the use of the product above. It has been added to give information about its use. Charging batteries with sources that can deliver the correct voltage and limited current is the 1st requirement. The product does not have the objective of charging the battery with the appropriate current. It is to prevent the battery from being charged for a long time and with high voltage.